KMedic® Pliers
- Pliers are handcrafted in Europe to feel good in surgeon’s hand and function extremely well.
- Forged from stainless steel and meticulously hand finished.
- Silk matte, hand-finished surface to reduce glare and resist corrosion.
- Stringent quality control by skilled technicians to ensure consistency, performance, durability, reliability, and proper coding, sizing and identification.
- Guaranteed for life to be free of defects in workmanship or material. More »
- Download a PDF of "KMedic® Pliers." It is a handy reference guide to our collection of pliers for orthopedic and spinal procedures. Click here.
- Double Action Wire Extraction Pliers
- Flat Nose Pliers with 2mm Tip
- Flat Nose Pliers with 3.5mm Tip
- Flat Nose Pliers with 5mm Tip
- Flat Nose K-Wire Pliers
- Heavy Duty Locking Pliers
- Lineman Pliers
- Narrow Nose Wire Pulling Forceps
- Needle Nose Pliers with 1mm Tip
- Needle Nose Pliers with 2mm Tip
- Needle Nose Locking Pliers
- Parallel Pliers
- Parallel Pliers with Cutter
- Pin Pulling Pliers
- Slip Joint Pliers
- Delicate needle nose jaws designed to handle cerclage wire.
- Jaw tapers to 1mm.
- Length: 5 ½"
- Reference number: KM48-242
- Tungsten carbide inserts and grooved opposing jaw design grip small pins securely.
- Small size is well suited for foot and hand procedures.
- Tip: 3mm
- Length: 5 ½"
- Reference number: KM46-578
- Delicate jaw tapers to 2mm.
- Made to twist and bend cerclage wire.
- Length: 6"
- Reference number: KM48-248
- Jaw tapers to 2mm making it easier to get close to the bone to remove K-Wires.
- Length: 5 ½"
- Reference number: KM48-245
- Broad, 5mm tip can grasp larger Steinmann Pins and K-Wires.
- Length: 5 ½"
- Reference number: KM48-246
- Multipurpose pliers with flat jaws.
- Tip: 3mm
- Length: 7"
| Description | Reference Number |
|---|---|
| Pliers | KM48-256 |
| Pliers with Groove for Cerlage Wire | KM48-254 |
- Combination plier and cutter.
- Cuts 0.2mm to 1.5mm cerclage wire
- Tip: 3.5mm
- Length: 6"
- Reference number: KM48-243
- Extra heavy jaws for pulling K-Wires and Steinmann Pins.
- An economical alternative to double action pliers.
- Tip: 3mm
- Length: 7 ½"
- Reference number: KM48-253
- Traditional design utility pliers have adjustable jaws.
- Good all purpose plier for handling Steinmann Pins, K-wires, screws, and rods.
- Tip: 10mm
- Length: 8"
- Reference number: KM48-262
- Combination pliers and K-Wire cuter.
- General purpose instrument with cutting edge.
- Maximum capacity: .062" (1.6mm)
- Length: 8 ½"
- Reference number: KM48-259
- Parallel grooved 10mm jaws provide enormous gripping power.
- Ideal for pin removal.
- Maximum opening: ½"
- Length: 7"
- Reference number: KM48-604
- Combination pliers and wire cutter has all the benefits of our Parallel Pliers plus a cutting jaw for K-Wires up to .062" (1.6mm).
- Maximum opening: ½"
- Tip: 10mm
- Length: 7"
- Reference number: KM48-605
- Double action and finely serrated carbide tips combine to provide a powerful grip on K-Wires and pins.
- The 2mm tip is ideal for removing K-Wire up to 0.62mm from small, hard-to-reach sites.
- The 4mm and 6mm jaws are ideal for grasping and pulling all sizes of K-Wires and pin.
- Length: 7"
| Description | Reference Number |
|---|---|
| 2mm Delicate Jaw, Carbide | KM46-572 |
| 4mm Jaw, Carbide | KM46-573 |
| 6mm Jaw, Carbide | KM46-574 |
- Heavy duty jaws lock securely onto pins.
- Reinforced jaw hinge and housing are more rigid to help prevent side to side shifting.
- Made from 300 and 400 series, surgical grade stainless steel.
- Chip resistant.
- Adjustment screw for easy control of jaw opening.
- One-handed, quick release self-locking lever.
| Description | Tip Width | Maximum Opening | Reference Number |
|---|---|---|---|
| Small, 6 ¾" | 7mm | 1" | KM48-600 |
| Medium, 8" | 9mm | 1" | KM48-602 |
| Large, 10" | 13mm | 1 ½" | KM48-608 |
- The 12" model has an impressive, powerful jaw. The body is made from 2.5mm stainless steel.
- Pliers have a more durable, reinforced jaw hinge and housing which helps keep the ends in alignment, especially when plier is twisted.
- One tapered "V" grooved jaw locks securely onto pins.
- Adjustment screw.
- One-handed, quick release self-locking lever.
- Made from 300 and 400 series surgical grade stainless steel.
| Length | Tip Width | Length of Jaw | Reference Number |
|---|---|---|---|
| 9 ½" | 5mm | 2 ½", jaws parallel at 3mm | KM48-606 |
| 12" | 7mm | 3", jaws parallel at 5mm | KM48-610 |
As a single source, product development and outsourcing solution, Teleflex Medical OEM can take your surgical instrument project from concept through completion. Our comprehensive portfolio of capabilities encompasses design, engineering, regulatory affairs, prototyping, manufacturing, and assembly. More »
Beere Medical® products provide market-leading quality, innovation, and performance for custom-configured, machined surgical instruments used during orthopedic and spinal procedures. In addition, the Beere Medical® brand is known for outstanding torque and ratcheting products, Evolution™ Implant Hardware Removal Kits, and Ortho-Grip® instrument handles. More »
SMD® (Specialized Medical Devices) is a well-recognized and trusted leader in the production of implantation devices and components, which include:
- Small bone implant systems
- Suture anchors
- Anchor locks
- Flat or anatomic plates
- Mono- and poly-axial screws
KMedic® surgical instruments offered by Teleflex Medical OEM are guaranteed for life to be free of defects in workmanship or material. Teleflex Medical OEM will repair or replace, at our discretion and at no charge, any instrument determined to be defective when used for its intended purpose.
Note: Guarantee is void if instrument was abused, used in a manner other than its intended purpose, or improperly maintained. Tungsten carbide inserts on scissors, needle holders, and wire cutters are guaranteed for three years. Replacement parts, such as springs, are guaranteed for one year.