KMedic® Screwdrivers,
Shafts, and Screw-Holding Sleeves
- These screwdrivers are used to place and remove bone screws.
- Handcrafted in Europe to feel good in surgeon’s hand and function extremely well.
- Forged from stainless steel and meticulously hand finished.
- Silk matte, hand-finished surface to reduce glare and resist corrosion.
- Stringent quality control by skilled technicians to ensure consistency, performance, durability, reliability, and proper coding, sizing and identification.
- Guaranteed for life to be free of defects in workmanship or material. More »
- Download a PDF of the reference guide, "KMedic® Screwdrivers, Bits, and Shafts." Click here.
- Length: 10"
- Phenolic handle
| Description | Number |
|---|---|
| 2.5mm Hexagonal Tip | KM48-350 |
| 3.5mm Hexagonal Tip | KM48-352 |
| Single Slot Tip | KM48-354 |
| Cruciform Tip | KM48-356 |
| Phillips Tip | KM48-358 |
| Description | Detail | Reference Number |
|---|---|---|
| Mini Screwdriver | 1.5mm, quick coupling end, sleeve included, length: 2 ¼" | KM47-950 |
| Screw-Holding Sleeve Only | KM47-959 |
| Description | Detail | Reference Number |
|---|---|---|
| Small Driver Shaft | 2.5mm, quick coupling end, length: 4" | KM47-953 |
| Small Screw Holding Sleeve | KM47-955 | |
| Large Driver Shaft | 3.5mm, quick coupling end, length: 4 ½" | KM47-954 |
| Driver Shaft with Notch | 2.5mm, quick coupling end, length: 5 ½" | KM47-348 |
| Screw-Holding Sleeve | KM47-365 | |
| Driver Shaft (Pelvic) with Notch | 3.5mm, quick coupling end, length: 6 ½" | KM47-961 |
| Screw-Holding Sleeve | KM47-983 |
| Description | Detail | Reference Number |
|---|---|---|
| Screwdriver with Notch | 3.5mm, length 10" | KM48-349 |
| Screwdriver with Notch (Pelvic) | 3.5mm, length 12" | KM48-353 |
| Description | Detail | Reference Number |
|---|---|---|
| 2.5mm Screwdriver with Sleeve | length: 7 ¾", phenolic handle | KM47-952 |
| Screw-Holding Sleeve Only | KM48-955 | |
| Screwdriver Only | KM47-956 | |
| 2.5mm Screwdriver with Notch | driver only, length: 8", phenolic handle | KM48-368 |
| Screw-Holding Sleeve Only | KM48-365 | |
| 2.5mm Screwdriver (Pelvic) with Notch | driver only, length: 10 ½", phenolic handle | KM48-368 |
| Screw-Holding Sleeve Only | KM48-365 |
| Description | Detail | Reference Number |
|---|---|---|
| 1.5/2.5mm Screwdriver with Sleeve | length: 7 ½", phenolic handle | KM47-957 |
| Screw-Holding Sleeve Only | KM48-959 | |
| Screwdriver Only | KM47-958 |
As a single source, product development and outsourcing solution, Teleflex Medical OEM can take your surgical instrument project from concept through completion. Our comprehensive portfolio of capabilities encompasses design, engineering, regulatory affairs, prototyping, manufacturing, and assembly. More »
Beere Medical® products provide market-leading quality, innovation, and performance for custom-configured, machined surgical instruments used during orthopedic and spinal procedures. In addition, the Beere Medical® brand is known for outstanding torque and ratcheting products, Evolution™ Implant Hardware Removal Kits, and Ortho-Grip® instrument handles. More »
SMD® (Specialized Medical Devices) is a well-recognized and trusted leader in the production of implantation devices and components, which include:
- Small bone implant systems
- Suture anchors
- Anchor locks
- Flat or anatomic plates
- Mono- and poly-axial screws
KMedic® surgical instruments offered by Teleflex Medical OEM are guaranteed for life to be free of defects in workmanship or material. Teleflex Medical OEM will repair or replace, at our discretion and at no charge, any instrument determined to be defective when used for its intended purpose.
Note: Guarantee is void if instrument was abused, used in a manner other than its intended purpose, or improperly maintained. Tungsten carbide inserts on scissors, needle holders, and wire cutters are guaranteed for three years. Replacement parts, such as springs, are guaranteed for one year.